The functionality of the Cyrix-Li-ct is analogous to the Cyrix-ct.
The Cyrix-Li-ct will parallel connect a lead acid starter battery and a LiFePO4 battery:
- if the Charge Disconnect output of the VE.Bus BMS is high, and
- if it senses 13,4V (resp. 26,8V) or more on one of its power terminals
The Cyrix will disengage immediately:
- when its control output becomes free floating, signalling cell over voltage or cell over temperature, and/or
- when battery voltage drops below 13,2V. Start assist function: a short positive pulse will close the relay during 30 seconds
A built-in transient voltage suppressor will limit the voltage spike that may occur when the Cyrix suddenly disengages due to cell overvoltage or over temperature.
| Brand | Victron Energy |
|---|---|
| Manufacturer Part Number | CYR010120412 |
| Voltage | Dec-24 |
| Continuous current & Breaking capacity at 12V or 24V | 120A |
| Current Consumption When Open | 4 mA |
| Protection Category | IP54 |
| Dimensions | H46 x W46 x D80mm |
| Weight (kg) | 0.11 |
| Warranty | 5 Years |
| Country of Manufacture | Malaysia |
