The Phoenix 12/250 VE.Direct inverter allows you to power domestic equipment “ requiring 230V “ using leisure or automotive batteries rated at 12V, 24V or 48V DC.
This unit has the UK plug.
Features of the Phoenix Inverter 12/250 VE.Direct
VE.Direct communication port
The VE.Direct port can be connected to:
- A computer (VE.Direct to USB interface cable needed)
- Apple and Android smartphones, tablets, MacBooks and other devices (VE.Direct Bluetooth Smart dongle needed)
Fully configurable:
- Low battery voltage alarm trip and reset levels
- Low battery voltage cut-off and restart levels
- Dynamic cut-off: load dependent cut-off level
- Output voltage 210 “ 245V
- Frequency 50 Hz or 60 Hz
- ECO mode on/off and ECO mode sense level
Monitoring:
- In- and output voltage, % load and alarms
Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years. The Phoenix Inverter 12/250 VE.Direct are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
High start-up power
Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.
ECO mode
When in ECO mode, the Phoenix Inverter 12/250 VE.Direct will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.
Remote on/off
A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector.
DC connection with screw terminals
No special tools needed for installation.
Monitor, operate & control your system
VictronConnect lets you get live status information and configure your Phoenix Inverter 12/250 VE.Direct when connected to a VE.Direct Bluetooth Smart Dongle.
The REC040010210R is the correct controller for the Phoenix Inverter VE.Directs.
Not sure what size inverter you need, why not take a look at our guide to sizing an inverter.
| Brand | Victron Energy |
|---|---|
| Manufacturer Part Number | PIN121251400 |
| GTIN | 8.72E+12 |
| Voltage | 12V |
| Cont. Output Power at 25°C | 250VA |
| Peak Power | 400W |
| Output AC Voltage | 230V |
| Protection Category | IP21 |
| Efficiency | 87% |
| Bluetooth Enabled | No |
| Plug Type | UK |
| Dimensions | H86 x W165 x D260mm |
| Weight | 2.4Kg |
| Warranty | 5 Years |
| Country of Manufacture | China |
