Victron Energy BMV-710H Smart Battery Monitor – BAM030710100
£678.60
The Victron Energy BMV-710H Smart is a high precision battery monitor that has been specially designed for systems with a high battery voltage ranging from 60 to 385 Volts.
These battery monitors calculate the state of charge of a battery and keep track of the ampere hours consumed from the battery by integrating the current flowing in or out of the battery.
They both come with a round head unit, a square bezel overlay, a screw ring for mounting, a 10m UTP RJ12 cable, a fused power supply cable and a 500A/50mV shunt. Because of the high voltage application, the shunt is housed in a special enclosure.
The BMV-710H Smart has Bluetooth built-in and can connect wirelessly to your phone (or tablet) via the VictronConnect App to conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more.
Features of the BMV-710H
Bluetooth Smart
Easy to install
All electrical connections are to the quick connect PCB on the current shunt. The shunt connects to the monitor with a standard RJ12 telephone cable. Included: RJ12 cable (10m) and battery cable with fuse (2m); no other components needed.
Also included are a separate front bezel for a square or round display appearance, a securing ring for the rear mounting and screws for the front mounting.
Standard features of the BMV-710H
– Battery voltage, current, power, ampere-hours consumed and state of charge
– Remaining time at the current rate of discharge
– Programmable visual and audible alarm
– Programmable relay, to turn off non critical loads or to run a generator when needed
– 500 Amp quick connect shunt and connection kit
– Shunt selection capability up to 10,000 Amps
– VE.Direct communication port
– Stores a wide range of historical events, which can be used to evaluate usage patterns and battery health
– Wide input voltage range: 6.5 “ 95V
– High current measurement resolution: 10 mA (0.01A)
– Low current consumption: 2.9Ah per month (4mA) @12V and 2.2Ah per month (3mA) @ 24V
BMV-700H: 60 to 385 VDC voltage range
No additional parts needed. Note: suitable for systems with grounded negative only (battery monitor is not isolated from shunt).
Other battery monitoring options
– Lynx Shunt VE.Can
Looking to mount the BMV-710H, why not purchase the wall mount.
To read more about the full BMV range & accessories, see this blog.
Brand | Victron Energy |
---|---|
Manufacturer Part Number | BAM030710100 |
GTIN | 8.72E+12 |
Protection Category | IP55 |
Bluetooth Enabled | No |
Front Diameter | 63mm |
Front Bezel | 69x69mm |
Body Diameter and Depth | 52mm and 31mm |
Warranty | 5 Years |
Country of Manufacture | Malaysia |
Related Products
Out of stock
Out of stock